Plug and Play BRZ/86/FRS Canbus Translator - Haltech Rebel LS
The new BRZ GT86 plug in Canbus translator for the Haltech Rebel LS.
This translator plugs into the two of the original FA 20 ECU plugs on the BRZ/86/FRS body.
The translator comes complete with a basic translator to Rebel LS harness that plugs into three of the plugs on the Rebel Harness (Pedal, Canbus and the Ignition Power wire).
Full integration is achieved between the BRZ / GT86 and the Rebel including Integration of the factory BRZ / 86 /FRS pedal using the factory wiring.
Operation of the standard cluster to display engine parameters (Tacho, Temp, Check Engine Light, gear indicator, and Fuel Consumption*) as well as removing all other warning lights and retaining other vehcle functions (such as APS and Power Steering). Alternatively a Haltech or other aftermarket dash can be used.
Basic chassis Inputs to the Haltech, including Brake/Clutch switches. Cruise Control buttons, A/C request and START (all via Canbus).
Advanced ABS inputs to the Rebel including individual wheel speeds, Steering Angle, Yaw Rate, Lateral/Longitudinal G sensors and brake pressure, which can be used to set up advanced features in the Rebel tune (such as traction control/launch control) Input to the Rebel of the factory ABS settings, such as VSC Sport mode, Traction control OFF etc. This can be used to switch between different settings in the tune, such as traction control and/or engine tuning.
The ABS data could also be displayed on a Haltech (or supported) dash.
Ther translator works by reading native Haltech Canbus data and emulating two Haltech I/O expansion boxes. This allows the input of various BRZ/86/FRS data onto the Haltech system.
The translators can also be user upgraded in the future if there are any extra features added. This can be done via a PC and a Tactrix cable plugged into the vehicles OBDII port.
The transator will also be provided with base Rebel LS tune file with the necesary tune modifications for the translator (will also show how to set it up manually in the documentation)
We will also be offerting a package deal with the Haltech translator and the new steering controller for $999AUD (including postage) in January 2025.
Please note due to current commitments and the Christmas rush, we don't think we will be able to send these out until early January 2025, which will also give us time to complete the documentation.
You can still order the translator te be first in line for the inital January deliveries.